1.4.2. Operation of system

Choose ventilation – a position (c) - and an intake of fresh air, turn temperature regulator in desirable situation, and the fan switch off ("OFF"). During the movement fresh air will come to salon.

All installations according to the previous paragraph, except for the fan which is turned on and transfer to some speed.

Choose heating – a position (e) – and an intake of fresh air, then turn the regulator of temperature and speed of the fan in desirable provisions. The fan speed is higher, the efficiency of heating is higher.

All installations according to the previous paragraph, except for switching to recirculation of internal air. If you allow a heater to work long so, in salon will be stuffy, and glasses will mist over. Therefore it is recommended to pass after bystry heating of salon to normal heating at once.

Choose two-layer giving – a position (a) and an intake of fresh air, then turn regulators of temperature and the switch of speed of the fan in desirable provisions. If the regulator of temperature is installed between the extreme provisions, air temperature, leaving from central and side snuffled, will be lower, than at the air which is coming out lower snuffled.

Choose heating and elimination of fogging – a position (f) and an intake of fresh air, then turn temperature regulator in desirable situation, and the speed regulator

the fan on a maximum. After the windshield is cleared, establish the desirable speed of the fan.

Choose heating and elimination of fogging – a position (d) and an intake of fresh air, then turn temperature regulator in desirable situation, and the fan speed regulator on a maximum. After the windshield will be cleared, establish the desirable speed of the fan.

NOTE If the bystry otpotevaniye of glasses is required, in addition to the above described operations on elimination of fogging install temperature regulator on a maximum and direct side nozzles so that air from them would come to side windows.