7.1.2. Removal and installation of the case of a headlight

Disconnect a wire from a negative conclusion of the rechargeable battery.

Remove a front bumper.

Turn off bolts of fastening of a headlight and remove a clip.

Fig. 7.3. Removal of the case of a headlight

Take out the case of a headlight 1 (fig. 7.3).

Disconnect sockets 2 from the case of a headlight 1 (fig. 7.3).

Installation is made as it should be, the return to removal, taking into account the following.

Fig. 7.4. Order of installation of bolts of fastening of a headlight

Establish bolts and a clip of fastening of a headlight, then tighten bolts of fastening of a headlight ("1" - "4") in the order shown in the figure 7.4.