Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. System of lighting
7.1.1. Arrangement of elements
7.1.2. Removal and installation of the case of a headlight
7.1.3. Replacement of a lamp of a headlight
7.1.4. Adjustment of light bunches of headlights with use of the screen
7.1.5. Removal and installation of the switch of headlights (in the lighting switch)
7.1.6. Removal and installation of the diode of a headlight
7.1.7. Check of a headlight, dimensional lamp, forward / back fog lamps
7.1.8. Switch of the alarm system
7.1.9. Removal and installation of the switch of indexes of turn (in the lighting switch)
7.1.10. Check of the switch of indexes of turn (in the lighting switch)
7.1.11. Check of the relay of the switch of indexes of turn and alarm system
7.1.12. Removal and installation of a lamp of illumination of registration plate (for models with a body the versatile person)
7.1.13. Removal and installation of a forward fog light
7.1.14. Replacement of a lamp of a fog light
7.1.15. Check of the switch of forward fog lights
7.1.16. Check of the switch of a back fog lamp
7.2. Equipment of salon
7.3. Screen wipers and windscreen washers
7.4. Electric checks of components of a control system of the engine
8. Body
9. Schemes of electric equipment
 










7-1-4-regulirovka-svetovykh-puchkov-far-s-ispolzovaniem-ehkrana.html

7.1.4. Adjustment of light bunches of headlights with use of the screen

NOTE
If other is not provided by the local legislation, adjust light bunches of headlights as follows.


Fig. 7.6. The scheme of adjustment of light bunches of headlights with use of the screen: 2 – headlight case; 3 – adjustment up / down; 4 – adjustment to the right / to the left; X–X – the horizontal axial line of lamps of headlights; A-and – the vertical axial line of a lamp of a left headlight; B–B – the vertical axial line of a lamp of a right headlight


After replacement of a headlight adjust the direction of light bunches (fig. 7.6).
Install the car on a plain horizontal surface before a wall (screen 1).
Distance of "a": 10 m.
Bring air pressure in tires to norm.
To Prozhmita a car body several times for stabilization of a suspension bracket.
When performing adjustment the driver has to be in the car.
Driver's weight: 75 kg.
Check an arrangement of light spots of passing beam, it has to correspond shown in the figure 7.6.
Distance of "H": about 130 mm.
Adjust a light bunch of a headlight the adjusting screw.

"previous page
7.1.3. Replacement of a lamp of a headlight
following page"
7.1.5. Removal and installation of the switch of headlights (in the lighting switch)