Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Diagnostics of malfunctions of a suspension bracket, disks and tires
4.2. Wheels and tires
4.3. Forward suspension bracket
4.4. Back suspension bracket
4.4.1. Angles of installation of back wheels
4.4.2. Check and adjustment of angles of installation of back wheels
4.4.3. Check and adjustment of a convergence
4.4.4. Removal and installation of a bar of the stabilizer of a back suspension bracket and/or plugs
4.4.5. Check of a bar of the stabilizer of a back suspension bracket, plug and/or rack
4.4.6. Removal and installation of a rack of a back suspension bracket assembled
4.4.7. Dismantling and assembly of a rack of a back suspension bracket assembled
4.5. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 



4-4-2-proverka-i-regulirovka-uglov-ustanovki-zadnikh-koles.html

4.4.2. Check and adjustment of angles of installation of back wheels

In operation only adjustment of a convergence is provided.
The possibility of adjustment of disorder of wheels and tilt angle of a longitudinal axis of turn of a wheel is not provided. Therefore if the corner of disorder or an inclination of a longitudinal axis of turn of wheels differs from norm because of the damages caused by severe road conditions or collision it is necessary to reveal and eliminate damages of a body or a suspension bracket.
"previous page
4.4.1. Angles of installation of back wheels		 following page"
4.4.3. Check and adjustment of a convergence