1.5.2. Folding of a back seat

Back sitting of the car can be put for receiving an occasional seat for freight forward. Ways of folding of seats at "hatch-back" and "sedan" differ from each other.

Fig. 1.113. Trailer socket of a diagonalnopoyasny belt

To put a back seat (seats) forward, before folding of the right part of a back separate trailer I will corrode (if average diagonalnopoyasny the belt has such "second buckle"). For this purpose insert the ignition key into a cut of the case of the socket and let's a belt be involved in bobbin knot.

Putting the right part of a back of a back seat, surely separate the trailer socket of an average diagonal and zone seat belt. It prevents damage of a cloth of a belt.

Fig. 1.114. Folding of a uvula

When the belt left up to the end, put a buckle uvula, as shown in the figure 1.114.

Before laying of a back lower an average head restraint (the additional equipment) up to the end.

Fig. 1.115. Lowering of an average head restraint

Get both extreme belts for hooks holders.

Fig. 1.116. An institution of an extreme belt for hooks holders

Extend buttons on each half of a back and put them forward.

To return a back (or its half) into place, lift it and wring out back that it was recorded.

Fig. 1.117. Clamp of a back seat

Returning a back of a back seat into place, be surely convinced of its reliable fixing.

If on the average place diagonalno a zone belt with the trailer socket, connect it after return of a back to normal situation; for this purpose extend a belt and implant an eye uvula on its end into a socket nest, having combined triangular badges; when fixing the click has to be heard.

Fig. 1.118. Connection of a diagonal belt

Be convinced of reliable fixing of the trailer socket and lack of perekrut of a belt.

If the barefaced metal eye on the end of a belt long was in hot weather right in the sun, it can burn you. Do not touch hot metal.

To put a back seat (seats) forward, before folding of the right part of a back separate trailer I will corrode (if on the average place a diagonal and zone belt with such "second buckle"); for this purpose insert the ignition key into a cut of the case of the socket and let's a belt be involved in bobbin knot.

Fig. 1.119. Installation of a uvula of a spring

When the belt left up to the end, implant an eye uvula, as shown in the figure 1.119, into a crack of a ceiling nest.

Get a cloth of an average belt for a hook holder.

Fig. 1.120. Fixing of an average belt

Get both extreme belts for hooks holders.

Take out back extreme head restraints (the additional equipment) or one of them.

Before laying of a back lower an average head restraint (the additional equipment) up to the end.

Pull for a thong and lift a seat pillow forward.

Fig. 1.121. Pillow raising

Establish the removed head restraint in nests in the top part of the lifted pillow, having directed before it back.

Fig. 1.122. Installation of the removed head restraint

Fig. 1.123. Laying of buckles of belts

Lay buckles of belts and all average nabedrenny belt (the additional equipment) in a back, as shown in the figure 1.123.

Fig. 1.124. Extraction of an eye

Take an eye from the holder (fig. 1.124).

Fig. 1.125. Extraction rychazhka

Pull for a rychazhok in the top part of a back and put a back (fig. 1.125) forward.

Fig. 1.126. Gearing of an eye

Hook an eye on the button on the back to it to the party of a back (fig. 1.126).

For return of a seat (seats) to normal situation do the procedure of folding of a seat (seats) upside-down. After return of a seat to normal situation try to move it and a back to be convinced of their normal fixing. Be convinced also that buckles of belts and an average belt are laid out on a seat pillow.

NOTE At return of a back seat to normal situation, be convinced that the movement of its parts does not have obstacles and that they are fixed reliably.

If an average belt diagonal and zone with the trailer socket, connect it after return of the right part of a back of a back seat to normal situation.

Remove average diagonalno a zone belt because of a hook holder, take out an eye uvula from a crack of a ceiling nest.

Fig. 1.127. Extraction of a uvula

Fig. 1.128. Threading of a belt

Pass a belt through the directing bracket (fig. 1.128).

NOTE That the seat belt settled down correctly, providing the best protection and lack of traumatizing with a belt in case of accident, surely see off it through the directing bracket.

Implant an eye uvula on the end of a belt into a socket nest, having combined triangular badges; when fixing the click has to be heard.

Be convinced of reliable fixing of the trailer socket and lack of perekrut of a belt.