Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General description
3.2.2. Replacement of oil in the mechanical transmission
3.2.3. Replacement of an epiploon from differential
3.2.4. Removal and installation of the lever and cable of gear shifting
3.2.5. Removal and installation of the sensor of speed of the car
3.2.6. Removal and installation of the switch of light of a backing
3.2.7. Removal and installation of a shaft of switching and choice of transfers
3.2.8. Dismantling and assembly of the fifth transfer
3.2.9. Repair of the transmission
3.2.10. Dismantling and assembly of the right case
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






3-2-10-razborka-i-sborka-pravogo-korpusa.html

3.2.10. Dismantling and assembly of the right case

Dismantling
Remove the car speed sensor.
Take out a differential epiploon from the right case.

Fig. 3.82. Removal of an external ring of the bearing of differential


Remove an external ring of the bearing of differential 1 by means of a brass core 2, if necessary (for cars with the drive on two wheels) (fig. 3.82).
Take out an epiploon of the leading shaft 1 by means of special tools, if necessary.

Fig. 3.83. Removal of an external ring of the right bearing of an intermediate shaft


Remove an external ring of the right bearing of an intermediate shaft 2 by means of special tools, if necessary (fig. 3.83).

Assembly

Fig. 3.84. Installation of an epiploon of the leading shaft


Establish an epiploon of the leading shaft 1, the spring of an epiploon has to be turned up. Use the special tool and the hammer for installation, apply jellied lubricant on a working edge of an epiploon (fig. 3.84).
Establish an external ring of the right bearing of an intermediate shaft 2 by means of special tools and the hammer.

Fig. 3.85. Installation of an external ring of the bearing of differential


Establish an external ring of the bearing of differential by means of the special tool and the hammer (for cars with the drive on two wheels) (fig. 3.85).
Install the car speed sensor.

"previous page
3.2.9. Repair of the transmission
following page"
3.3. Automatic transmission