3.2.4. Removal and installation of the lever and cable of gear shifting
|Fig. 3.42. Lever and cable of gear shifting: 1 – gear shifting lever handle; 2 – lever cover plug; 3 – gear shifting lever cover; 4 – gear shifting cable; 5 – gear shifting cable; 6 – the directing gear shifting cable nut; 7 – gear shifting lever assembled; 8 – bolt of fastening of a cable; 9 – cable arm bolt; 10 – plug through passage; 11 – E-shaped ring
Remove a console box.
Disconnect gear shifting cables from the gear shifting lever.
Turn off the directing nuts of a cable of gear shifting and remove the gear shifting lever from a body.
Disconnect gear shifting cables from the transmission.
Remove E-shaped rings, the plug through passage and a clip of a cable, then remove gear shifting cables from a body.
Installation is made as it should be, the return to removal, except for the following.
Tighten all bolts and nuts the nominal force of an inhaling.
Apply jellied lubricant on all rotating or sliding parts.