Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General description
3.2.2. Replacement of oil in the mechanical transmission
3.2.3. Replacement of an epiploon from differential
3.2.4. Removal and installation of the lever and cable of gear shifting
3.2.5. Removal and installation of the sensor of speed of the car
3.2.6. Removal and installation of the switch of light of a backing
3.2.7. Removal and installation of a shaft of switching and choice of transfers
3.2.8. Dismantling and assembly of the fifth transfer
3.2.9. Repair of the transmission
3.2.10. Dismantling and assembly of the right case
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






3-2-7-snyatie-i-ustanovka-vala-pereklyucheniya-i-vybora-peredach.html

3.2.7. Removal and installation of a shaft of switching and choice of transfers

Fig. 3.49. Details of a shaft of switching and choice of transfers: 1 – shaft of the choice and gear shifting; 2 – cam of inclusion of the 5th transfer and transfer of a backing; 3 – gear shifting blocking plate; 4 – lever of the choice and gear shifting; 5 – gear shifting cable lever; 6 – transfer choice cable lever; 7 – bolts of the case of the directing gear shifting plug; 8 – bolt of an arm of the lever of the choice of transfers; 9 – a bolt of the directing blocking of inclusion of transfer of a backing; 10 – gear shifting blocking bolt; 11 – guide case; 12 – plug of a shaft of the lever of the choice of transfers; 13 – plug of the lever of the choice of transfers



Removal

Fig. 3.50. Removal of a shaft of switching and choice of transfers


Turn off a bolt of blocking of gear shifting 1 and a bolt of the directing blocking 2 inclusions of a backing from a case of the main transfer (fig. 3.50).
Remove a shaft of switching and the choice of transfers 3.

Installation
Clear the interfaced surface of the case of a guide.

Fig. 3.51. Installation of a shaft of switching and choice of transfers


Install a shaft of switching and choice of transfers with new laying in the transmission (fig. 3.51).
Establish an arm of a ventilating hose together with bolts of the case of a guide of gear shifting 2 on which carving part sealant for carvings was applied, then tighten bolts the nominal force of an inhaling.
The moment of the inhaling of a bolt of the case directing to gear shiftings (a): 23 N · m.
Tighten a bolt of an arm of the lever of the choice of transfers 5.
Moment of an inhaling of a bolt of an arm of the lever of the choice of transfers (c): 23 N · m.
Establish a washer and a bolt of blocking of gear shifting 3 on which carving part sealant for carvings was applied, then tighten a bolt the nominal force of an inhaling.
Moment of an inhaling of a bolt of blocking of gear shifting (b): 23 N · m.
Establish a washer and a bolt of the directing blocking of inclusion of a backing 4 on which carving part sealant for carvings was applied, then tighten a bolt the nominal force of an inhaling.
The moment of an inhaling of a bolt of the directing blocking of inclusion of a backing (d): 23 N · m.
Tighten the switch of light of a backing 1.
Check rotation of the leading shaft on each transfer.
Be convinced of operability of the switch of light of a backing by means of an ohmmeter.

"previous page
3.2.6. Removal and installation of the switch of light of a backing
following page"
3.2.8. Dismantling and assembly of the fifth transfer