Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General description
3.2.2. Replacement of oil in the mechanical transmission
3.2.3. Replacement of an epiploon from differential
3.2.4. Removal and installation of the lever and cable of gear shifting
3.2.5. Removal and installation of the sensor of speed of the car
3.2.6. Removal and installation of the switch of light of a backing
3.2.7. Removal and installation of a shaft of switching and choice of transfers
3.2.8. Dismantling and assembly of the fifth transfer
3.2.9. Repair of the transmission
3.2.10. Dismantling and assembly of the right case
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 




בפיזור האחיד של המלנין היא הפיגמנטציה

3-2-6-snyatie-i-ustanovka-vyklyuchatelya-sveta-zadnego-khoda.html

3.2.6. Removal and installation of the switch of light of a backing

Removal
Disconnect a wire from a negative conclusion of the rechargeable battery.

Fig. 3.46. Backing light switch socket


Disconnect the socket of the switch of light of a backing of 1 (fig. 3.46).
Remove the backing light switch.

Installation

Fig. 3.47. New sealing ring of the switch of light of a backing


To apply oil on a new sealing ring 1, and then install the switch of light of a backing 2 and tighten its nominal force of an inhaling (fig. 3.47).
Moment of an inhaling of the switch of light of a backing (a): 23 N · m.
Connect the backing light switch socket.
Connect a wire to a negative conclusion of the rechargeable battery.

Check of the switch of light of a backing

Fig. 3.48. Check of the switch of light of a backing


Check the backing light switch, using an ohmmeter (fig. 3.48).
Include: the chain is closed
Switch off: the chain is opened

"previous page
3.2.5. Removal and installation of the sensor of speed of the car
following page"
3.2.7. Removal and installation of a shaft of switching and choice of transfers