Suzuki Liana since 2002
	1. Operation and maintenance of the car
	2. Engine
	3. Transmission
		3.1. Coupling
		3.2. Mechanical transmission
			3.2.1. General description
			3.2.2. Replacement of oil in the mechanical transmission
			3.2.3. Replacement of an epiploon from differential
			3.2.4. Removal and installation of the lever and cable of gear shifting
			3.2.5. Removal and installation of the sensor of speed of the car
			3.2.6. Removal and installation of the switch of light of a backing
			3.2.7. Removal and installation of a shaft of switching and choice of transfers
			3.2.8. Dismantling and assembly of the fifth transfer
			3.2.9. Repair of the transmission
			3.2.10. Dismantling and assembly of the right case
		3.3. Automatic transmission
		3.4. Driving mechanism
		3.5. Tables
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

3-2-5-snyatie-i-ustanovka-datchika-skorosti-avtomobilya.html

3.2.5. Removal and installation of the sensor of speed of the car

Removal

Disconnect a wire from a negative conclusion of the rechargeable battery.

To disconnect the car 1 speed sensor socket.

Fig. 3.43. Removal of the sensor of speed of the car

Remove the sensor of speed of the car 2 (fig. 3.43).

Installation

Fig. 3.44. New sealing ring

To apply oil on a new sealing ring 1, and then install the car speed sensor on the transmission (fig. 3.44).

Moment of an inhaling of a bolt of the sensor of speed of the car (a): 5,5 N · m.

Fig. 3.45. Ustanovk of the car speed sensor

Connect the socket of the sensor of speed of the car 1 (fig. 3.45).

Connect a wire to a negative conclusion of the rechargeable battery.