1-3-12-informacionnyjj-displejj.html
1.3.12. Information display
|
Fig. 1.46. Information display (type A): 1 – hours; 2 – index of external temperature; 3 – instant consumption of fuel
|
Hours and index of external temperature
|
Fig. 1.47. Hours and index of external temperature
|
At "ON" turned in situation or "ASS" the ignition key indications of time are output to the display.
Installation of the indication of hours is made as follows.
Hours
Each pressing the N (a) button increases the displayed hours on 1. For bystry change of values of hours, press the button longer than 1 page and hold it. Minutes. Each pressing the M (b) button increases displayed for about 1 minutes. For bystry change of values of minutes, press the button longer than 1 page and hold it.
Thermometer 2
At "ON" turned in situation or "ASS" the ignition key indications of external temperature are output to the display. If external temperature below zero on the display is removed a badge (c).
NOTE
During a stop and the movement with a small speed of the indication of temperature do not correspond to its deystvitel-nomuznacheniye.
|
Instant consumption of fuel 3
|
Fig. 1.48. Indications of instant consumption of fuel
|
During the movement of the car on the display instant consumption of fuel is shown. At will this function of the display can be turned off.
NOTE
During a stop on the display it will be shown "–. –".
|
It is possible to change units of measure of instant consumption of fuel, and also to disconnect this part of the display. to change units of measure of instant consumption of fuel perform the following operations:
– press the Unit button (d) and hold during 2kh seconds or more. The units of measure of instant consumption of fuel shown on the display will start blinking. When value of instant consumption of fuel is disconnected on the display will appear "–. –";
|
Fig. 1.49. Scheme of change of indications of units of measure
|
– press and at once release the Unit button (d) to change units of measure of instant consumption of fuel as shown in the figure 1.49;
– press the Unit button (d) and hold during 2kh seconds or more. The units of measure of instant consumption of fuel shown on the display will stop blinking, crossed out sections "– –. –" will go out and the display will be switched-off. If the Unit button (d) is not pressed during 8 with, then the units of measure of instant consumption of fuel shown on the display will stop blinking automatically, crossed out sections "– –. –" will go out and the display will be switched-off.
|
Fig. 1.50. Information display (type B): 1 – button "H"; 2 – button "H"; 3 – hours
|
NOTE
The information display will switch in the mode which is originally set by production after a detachment and the subsequent connection of the negative plug of the rechargeable battery (fig. 1.50).
|
Index of external temperature
At "ON" turned in situation or "ASS" the ignition key indications of time and external temperature are output to the display.
Installation of hours
Each pressing the N (a) button increases the displayed hours on 1. For bystry change of values of hours, press the button longer than 1 page and hold it.
Installation of minutes
Each pressing the M (b) button increases displayed for about 1 minutes. For bystry change of values of minutes, press the button longer than 1 page and hold it.
If external temperature below zero on the display is removed a badge (A).
NOTE
During a stop and the movement with a small speed of the indication of temperature do not correspond to its valid value.
|
NOTE
The information display will switch in the mode which is originally set by production after a detachment and the subsequent connection of the negative plug of the rechargeable battery.
|
|