1.3.15. Switch of a cleaner and washer of a windshield

Fig. 1.59. Modes of switching of screenwashes

For inclusion of screen wipers transfer the lever down to one of three working provisions (fig. 1.59).

In the provision of "INT" operating mode faltering. This mode is convenient when driving in fog or a drizzle.

In the provision of "LO" speed constant, but low.

In the provision of "HI" speed constant and high.

For switching off of screen wipers return the switch lever up to the provision of "OFF".

Fig. 1.60. Koltsevo switch of frequency of faltering work

If on the lever there is a ring-shaped regulator of frequency of faltering work, establish by turn its desirable interval (fig. 1.60).

Fig. 1.61. Mode of switching of a washer

For supply of the washing liquid on glass pull the lever on yourself (fig. 1.61). At the same time the disconnect screen wiper joins automatically at a small speed if it has a faltering operating mode ("INT").

NOTE That the windshield at a frost did not freeze, direct to and during an obmyv to it air from a heater. Do not apply antifreeze as the washing liquid. On a windshield it can worsen visibility, on a body – harms a covering.

ATTENTION In order to avoid damage of a cleaner and a washer of a windshield the following precautionary measures are necessary. Do not continue to include a washer if liquid on glass does not arrive (the tank is empty): It is possible to damage the pump electric motor. Do not try to delete dirt from a dry windshield with a screen wiper – it is so possible to damage a windshield and elastic bands of brushes of a cleaner. Always moisten a windshield with the washing liquid before inclusion of a screen wiper. Before inclusion of a screen wiper remove ice and packed snow from brushes. Regularly check washer liquid level. Check level at bad weather more often. At a frost fill a tank on 3/4 its volumes to leave space for expansion of the washing liquid at possible freezing it.