Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.3.1. General information
2.3.2. Diagnostic information and procedures
2.3.3. Removal and installation of tubes or hoses of the cooling system
2.3.4. Removal and installation of the thermostat
2.3.5. Check of the thermostat
2.3.6. Removal and installation of the valve in a throttle branch pipe (if is available)
2.3.7. Check on the cooling system radiator fan car
2.3.8. Check of the relay of the fan of the cooling system
2.3.9. Removal and installation of the fan of the cooling system
2.3.10. Check and cleaning of a radiator on the car
2.3.11. Removal and installation of a radiator
2.3.12. Check and adjustment of a tension of a driving belt of the pump of cooling liquid / generator
2.3.13. Removal and installation of a driving belt of the pump of cooling liquid / generator
2.3.14. Removal and installation of the pump of cooling liquid
2.3.15. Check of the pump of cooling liquid
2.4. Engine lubrication system
2.5. Fuel system
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






2-3-15-proverka-nasosa-okhlazhdayushhejj-zhidkosti.html

2.3.15. Check of the pump of cooling liquid

ATTENTION
Do not disassemble the pump of cooling liquid.
If repair of the pump is required, replace it assembled.


Fig. 2.202. The scheme of laying of sealant on the interfaced surface of the pump of cooling liquid


Rotating the pump of cooling liquid manually, check smoothness of operation. If the krylchatka of the pump does not rotate smoothly or publishes noise at rotation, replace it (fig. 2.202).

Fig. 2.203. Check of the pump of cooling liquid



Technical characteristics (Inhaling moments)

"previous page
2.3.14. Removal and installation of the pump of cooling liquid
following page"
2.4. Engine lubrication system