Suzuki Liana since 2002
	1. Operation and maintenance of the car
	2. Engine
		2.1. Preliminary checks
		2.2. Mechanical part of engines
		2.3. Engine cooling system
			2.3.1. General information
			2.3.2. Diagnostic information and procedures
			2.3.3. Removal and installation of tubes or hoses of the cooling system
			2.3.4. Removal and installation of the thermostat
			2.3.5. Check of the thermostat
			2.3.6. Removal and installation of the valve in a throttle branch pipe (if is available)
			2.3.7. Check on the cooling system radiator fan car
			2.3.8. Check of the relay of the fan of the cooling system
			2.3.9. Removal and installation of the fan of the cooling system
			2.3.10. Check and cleaning of a radiator on the car
			2.3.11. Removal and installation of a radiator
			2.3.12. Check and adjustment of a tension of a driving belt of the pump of cooling liquid / generator
			2.3.13. Removal and installation of a driving belt of the pump of cooling liquid / generator
			2.3.14. Removal and installation of the pump of cooling liquid
			2.3.15. Check of the pump of cooling liquid
		2.4. Engine lubrication system
		2.5. Fuel system
		2.6. System of ignition
		2.7. System of release
		2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
		2.9. Tables
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

2-3-3-snyatie-i-ustanovka-trubok-ili-shlangov-sistemy-okhlazhdeniya.html

2.3.3. Removal and installation of tubes or hoses of the cooling system

Removal

Merge liquid from system.

For removal of a tube or a hose, weaken a collar on a hose and remove the end of a hose.

Installation

Establish the removed details as it should be, the return to a removal order, except for the following.

Reliably tighten all collars.

Fill the cooling system.