Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.3.1. General information
2.3.2. Diagnostic information and procedures
2.3.3. Removal and installation of tubes or hoses of the cooling system
2.3.4. Removal and installation of the thermostat
2.3.5. Check of the thermostat
2.3.6. Removal and installation of the valve in a throttle branch pipe (if is available)
2.3.7. Check on the cooling system radiator fan car
2.3.8. Check of the relay of the fan of the cooling system
2.3.9. Removal and installation of the fan of the cooling system
2.3.10. Check and cleaning of a radiator on the car
2.3.11. Removal and installation of a radiator
2.3.12. Check and adjustment of a tension of a driving belt of the pump of cooling liquid / generator
2.3.13. Removal and installation of a driving belt of the pump of cooling liquid / generator
2.3.14. Removal and installation of the pump of cooling liquid
2.3.15. Check of the pump of cooling liquid
2.4. Engine lubrication system
2.5. Fuel system
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






2-3-9-snyatie-i-ustanovka-ventilyatora-sistemy-okhlazhdeniya.html

2.3.9. Removal and installation of the fan of the cooling system

Removal
Disconnect a wire from a negative conclusion of the rechargeable battery.
Disconnect the cooling system fan electric motor socket.
Remove the electric motor of the fan of the condenser of the air conditioning system if the car is equipped with the air conditioning system.

Fig. 2.194. Removal of the electric motor of the fan of the cooling system


Remove the electric motor of the fan of the cooling system 1 from a radiator (fig. 2.194).

Installation
Installation is made as it should be, the return to removal.

NOTE
Add cooling liquid and check the level of cooling liquid.
After installation, check the bringing radiator hose for leak existence.


"previous page
2.3.8. Check of the relay of the fan of the cooling system
following page"
2.3.10. Check and cleaning of a radiator on the car