Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General description
3.3.2. Design of system of blocking of brakes
3.3.3. Check of level of liquid in the automatic transmission
3.3.4. Replacement of liquid in the automatic transmission
3.3.5. Removal and installation of a cable of the choice of transfer
3.3.6. Adjustment of a cable of the choice of transfer
3.3.7. Check and adjustment of the sensor of the mode of the movement (switching sensor)
3.3.8. Removal and installation of the sensor of speed of the leading shaft
3.3.9. Check of the sensor of speed of the leading shaft
3.3.10. Removal and installation of the sensor of temperature of liquid
3.3.11. Check of the sensor of temperature of liquid
3.3.12. Check of the switch of the mode of the raising transfer
3.3.13. Removal and installation of electromagnetic valves (switching valve, valve of the hydrotransformer and valve of synchronization)
3.3.14. Check of electromagnetic valves (switching valves, electromagnetic valve of the hydrotransformer and electromagnetic valve of synchronization)
3.3.15. Replacement of an epiploon from differential
3.3.16. Replacement of the electromagnetic device of blocking of switching
3.3.17. Removal and installation of a cable of blocking of a key
3.3.18. Replacement of hoses of a cooler of the automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






3-3-15-zamena-salnika-so-storony-differenciala.html

3.3.15. Replacement of an epiploon from differential

Lift the car and merge working liquid from the automatic transmission.
Take out hinges of shaft of the drive of wheels from the differential mechanism of the transmission.
For removal of an epiploon from differential, it is not required to separate power shafts from rotary fists.

NOTE
On all-wheel drive models the transmission has no differential epiploon on the right side.

Take out an epiploon (i) of differential the screw-driver or the similar tool.

Fig. 3.113. Differential epiploons


Apply jellied lubricant on a working edge of an epiploon of differential of 1 (fig. 3.113).

Fig. 3.114. Installation of new epiploons of differential: A – the right side (only for models with the drive on two wheels); B – left side


Establish new epiploons of differential 1 by means of the special tool (fig. 3.114).
Establish a power shaft.
Fill in liquid in the automatic transmission.

"previous page
3.3.14. Check of electromagnetic valves (switching valves, electromagnetic valve of the hydrotransformer and electromagnetic valve of synchronization)
following page"
3.3.16. Replacement of the electromagnetic device of blocking of switching