Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General description
3.3.2. Design of system of blocking of brakes
3.3.3. Check of level of liquid in the automatic transmission
3.3.4. Replacement of liquid in the automatic transmission
3.3.5. Removal and installation of a cable of the choice of transfer
3.3.6. Adjustment of a cable of the choice of transfer
3.3.7. Check and adjustment of the sensor of the mode of the movement (switching sensor)
3.3.8. Removal and installation of the sensor of speed of the leading shaft
3.3.9. Check of the sensor of speed of the leading shaft
3.3.10. Removal and installation of the sensor of temperature of liquid
3.3.11. Check of the sensor of temperature of liquid
3.3.12. Check of the switch of the mode of the raising transfer
3.3.13. Removal and installation of electromagnetic valves (switching valve, valve of the hydrotransformer and valve of synchronization)
3.3.14. Check of electromagnetic valves (switching valves, electromagnetic valve of the hydrotransformer and electromagnetic valve of synchronization)
3.3.15. Replacement of an epiploon from differential
3.3.16. Replacement of the electromagnetic device of blocking of switching
3.3.17. Removal and installation of a cable of blocking of a key
3.3.18. Replacement of hoses of a cooler of the automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






3-3-7-proverka-i-regulirovka-datchika-rezhima-dvizheniya-datchik-pereklyucheniya.html

3.3.7. Check and adjustment of the sensor of the mode of the movement (switching sensor)

Check
Disconnect the socket of the sensor of the mode of the movement 1.

Fig. 3.97. The scheme of check of an electric chain on conclusions of the socket of the sensor of the mode of the movement


Check existence of an electric chain on the conclusions shown in the figure 3.97 when moving the lever of the selector.

Adjustment
Transfer the selector 4 lever to situation "N".

Fig. 3.98. Scheme of adjustment of the sensor of the mode of the movement


Check coincidence of the direction of an arrow on a lock washer 2 and the basic line "N" 1 on the sensor of the mode of the movement. Otherwise, weaken bolts of the sensor 3 and combine tags (fig. 3.98).
Moment of an inhaling of a bolt of the sensor of the mode of the movement (a): 5,5 N · m.

Fig. 3.99. Scheme of check of a possibility of start of the engine and inclusion of a lamp of a lamp of a backing


Check a possibility of start of the engine when the lever of the selector is in situation "N" and "P", and impossibility of start of the engine when the lever of the selector is in situation "D", "2", "L" or "R". Besides, check inclusion of a lamp of a lamp of a backing when the lever of the selector is in situation "R" (fig. 3.99).

"previous page
3.3.6. Adjustment of a cable of the choice of transfer
following page"
3.3.8. Removal and installation of the sensor of speed of the leading shaft