Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General description
3.3.2. Design of system of blocking of brakes
3.3.3. Check of level of liquid in the automatic transmission
3.3.4. Replacement of liquid in the automatic transmission
3.3.5. Removal and installation of a cable of the choice of transfer
3.3.6. Adjustment of a cable of the choice of transfer
3.3.7. Check and adjustment of the sensor of the mode of the movement (switching sensor)
3.3.8. Removal and installation of the sensor of speed of the leading shaft
3.3.9. Check of the sensor of speed of the leading shaft
3.3.10. Removal and installation of the sensor of temperature of liquid
3.3.11. Check of the sensor of temperature of liquid
3.3.12. Check of the switch of the mode of the raising transfer
3.3.13. Removal and installation of electromagnetic valves (switching valve, valve of the hydrotransformer and valve of synchronization)
3.3.14. Check of electromagnetic valves (switching valves, electromagnetic valve of the hydrotransformer and electromagnetic valve of synchronization)
3.3.15. Replacement of an epiploon from differential
3.3.16. Replacement of the electromagnetic device of blocking of switching
3.3.17. Removal and installation of a cable of blocking of a key
3.3.18. Replacement of hoses of a cooler of the automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 










3-3-18-zamena-shlangov-okhladitelya-avtomaticheskojj-korobki-peredach.html

3.3.18. Replacement of hoses of a cooler of the automatic transmission

Rubber hoses of a cooler of liquid of the automatic transmission have to be checked through the specified periods. When replacing hoses, pay attention to the following:
– at the same time replace collars;
– put on hoses to restrictive tags;
– reliably clamp collars.

Fig. 3.121. Hoses of a cooler of the automatic transmission: 1 – radiator; 2 – the bringing hose (an exit of a cooler of the automatic transmission); 3 – the taking-away hose (an entrance of a cooler of the automatic transmission)




"previous page
3.3.17. Removal and installation of a cable of blocking of a key
following page"
3.4. Driving mechanism