Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.1.1. Check of a driving belt
2.1.2. Replacement of an oil filter
2.1.3. Check of a compression
2.1.4. Engine vacuum check
2.1.5. Check of gaps in the drive of valves
2.1.6. Check of level of cooling liquid
2.1.7. Check and cleaning of the cooling system of the engine
2.1.8. Check of the mode of a cut-off of supply of fuel
2.1.9. Check of a spark of ignition
2.1.10. Removal and installation of a high-voltage wire
2.1.11. Check of a high-voltage wire
2.1.12. Removal and installation of a spark plug
2.1.13. Check of a spark plug
2.1.14. Removal and installation of the coil of ignition (with igniter)
2.1.15. Check of the coil of ignition (with igniter)
2.1.16. Check of installation of a corner of an advancing of ignition
2.2. Mechanical part of engines
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 










2-1-12-snyatie-i-ustanovka-svechi-zazhiganiya.html

2.1.12. Removal and installation of a spark plug

Removal
Uncover the engine a cover of a head of the block of cylinders.
Remove high-voltage wires and blocks of coils of ignition.
Turn out spark plugs.

Installation
Establish spark plugs and tighten their nominal force inhalings.
Spark plug inhaling moment: 25 N · m.
Install blocks of coils of ignition.
Connect high-voltage wires.
Establish an engine cover on a cover of a head of the block of cylinders.

"previous page
2.1.11. Check of a high-voltage wire
following page"
2.1.13. Check of a spark plug