Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General description
6.1.1. Design of the brake system
6.1.2. Check of pressure (if there is LSPV pressure limiter)
6.1.3. Check of height of a pedal of a brake
6.1.4. Removal of air from the brake system
6.1.5. Removal and installation of the hose / pipeline of the forward brake mechanism
6.1.6. Removal and ustanovkashlang / pipeline of the back brake mechanism
6.1.7. Check of brake hoses and pipelines
6.1.8. Removal and installation of the tank of the main cylinder
6.1.9. Removal and installation of the main cylinder
6.1.10. Dismantling and assembly of the main cylinder
6.1.11. Assembly of the main cylinder
6.1.12. Check of the main cylinder
6.1.13. Amplifier of brakes
6.1.14. Removal and installation of the amplifier of brakes
6.1.15. Check and adjustment of the amplifier of brakes
6.1.16. Removal and installation of the limiter of pressure depending on loading
6.1.17. Check and adjustment of the parking brake system
6.1.18. Removal and installation of a cable of the parking brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






6-1-12-proverka-glavnogo-cilindra.html

6.1.12. Check of the main cylinder

Check all removed details for wear or existence of damages and replace if necessary.

NOTE
Wash up all details in brake fluid.
Do not reuse cuffs of the piston and a cuff of the cylinder.

Check walls of the main cylinder for existence рисок or corrosion. It is better to replace the cylinder subjected to impact of corrosion. Corrosion can be identified on existence of poles or an excessive roughness.

NOTE
Polishing of walls of the cylinder with the aluminum case abrasive materials and the tool as it is possible to damage walls is not allowed.

Wash out the cylinder in pure brake fluid. Shake the liquid remains after rinsing. Do not use fabric for removal of the remains of liquid as fibers of fabric can remain in the cylinder.

"previous page
6.1.11. Assembly of the main cylinder
following page"
6.1.13. Amplifier of brakes