Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General description
6.1.1. Design of the brake system
6.1.2. Check of pressure (if there is LSPV pressure limiter)
6.1.3. Check of height of a pedal of a brake
6.1.4. Removal of air from the brake system
6.1.5. Removal and installation of the hose / pipeline of the forward brake mechanism
6.1.6. Removal and ustanovkashlang / pipeline of the back brake mechanism
6.1.7. Check of brake hoses and pipelines
6.1.8. Removal and installation of the tank of the main cylinder
6.1.9. Removal and installation of the main cylinder
6.1.10. Dismantling and assembly of the main cylinder
6.1.11. Assembly of the main cylinder
6.1.12. Check of the main cylinder
6.1.13. Amplifier of brakes
6.1.14. Removal and installation of the amplifier of brakes
6.1.15. Check and adjustment of the amplifier of brakes
6.1.16. Removal and installation of the limiter of pressure depending on loading
6.1.17. Check and adjustment of the parking brake system
6.1.18. Removal and installation of a cable of the parking brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






6-1-5-snyatie-i-ustanovka-shlanga-truboprovoda-perednego-tormoznogo-mekhanizma.html

6.1.5. Removal and installation of the hose / pipeline of the forward brake mechanism

Removal
Lift the car and install it on support.
Remove a wheel.

NOTE
This work can be not performed at a detachment of pipelines from the main cylinder.

Clear of dirt and foreign objects of connection of pipelines and hoses.
Remove a brake hose or the pipeline.

Installation
The procedure of installation of a brake hose is performed in the sequence, the return to removal, taking into account the following.
Make sure that the steering wheel is in provision of the rectilinear movement and the hose is not overwound and will not bend.
Make sure that the flexible hose does not make contact with suspension bracket details in extreme right and extreme left provisions of a steering wheel. If it takes place, remove a hose and establish it anew. Bring the level of brake fluid in the tank to norm.
Remove air from the brake system. See." removal of air from the brake system".
Execute the brake test and check the established details for lack of leak of brake fluid.

"previous page
6.1.4. Removal of air from the brake system
following page"
6.1.6. Removal and ustanovkashlang / pipeline of the back brake mechanism