Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.5.1. Precautionary measures at service of fuel system
2.5.2. Description of fuel system
2.5.3. Description of a fuel supply system
2.5.4. Description of the fuel pump
2.5.5. Procedure of dumping of pressure of fuel
2.5.6. Procedure of check of leak of fuel
2.5.7. Removal and installation of a fuel pipe
2.5.8. Removal and installation of a fuel nozzle
2.5.9. Check of a fuel nozzle
2.5.10. Removal and installation of the regulator of pressure of fuel
2.5.11. Check of a cover of a jellied mouth of the fuel tank
2.5.12. Removal and installation of the fuel tank
2.5.13. Procedure of cleaning of the fuel tank
2.5.14. Removal and installation of the inlet valve of the fuel tank
2.5.15. Check of the inlet valve of the fuel tank
2.5.16. Check of the fuel pump on the car
2.5.17. Removal and installation of the fuel pump assembled
2.5.18. Dismantling and assembly of the fuel pump
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






2-5-10-snyatie-i-ustanovka-regulyatora-davleniya-topliva.html

2.5.10. Removal and installation of the regulator of pressure of fuel

Removal
Dump fuel pressure.
Disconnect a wire from a negative conclusion of the rechargeable battery.

Fig. 2.237. Detachment of a vacuum hose


Disconnect a vacuum hose 1 from the regulator of pressure of fuel 2 (fig. 2.237).
Remove the fuel pressure regulator from a fuel stage.
Disconnect a returnable hose 3 from pressure regulator.

Installation
At installation act as it should be, the return to a removal order, and observe the following precautionary measures.

Fig. 2.238. Sealing колцо


Use a new sealing ring of 1 (fig. 2.238).
Apply a thin film of fuel on a sealing ring to facilitate installation.
Tighten fuel pressure regulator bolts the nominal force of an inhaling.
Moment of an inhaling of a bolt of the regulator of pressure of fuel (a): 10 N · m.
Without starting the engine include ignition and be convinced of lack of leak of fuel in connections of fuel-supply lines.

"previous page
2.5.9. Check of a fuel nozzle
following page"
2.5.11. Check of a cover of a jellied mouth of the fuel tank