Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.5.1. Precautionary measures at service of fuel system
2.5.2. Description of fuel system
2.5.3. Description of a fuel supply system
2.5.4. Description of the fuel pump
2.5.5. Procedure of dumping of pressure of fuel
2.5.6. Procedure of check of leak of fuel
2.5.7. Removal and installation of a fuel pipe
2.5.8. Removal and installation of a fuel nozzle
2.5.9. Check of a fuel nozzle
2.5.10. Removal and installation of the regulator of pressure of fuel
2.5.11. Check of a cover of a jellied mouth of the fuel tank
2.5.12. Removal and installation of the fuel tank
2.5.13. Procedure of cleaning of the fuel tank
2.5.14. Removal and installation of the inlet valve of the fuel tank
2.5.15. Check of the inlet valve of the fuel tank
2.5.16. Check of the fuel pump on the car
2.5.17. Removal and installation of the fuel pump assembled
2.5.18. Dismantling and assembly of the fuel pump
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






2-5-13-procedura-ochistki-toplivnogo-baka.html

2.5.13. Procedure of cleaning of the fuel tank

ATTENTION
At implementation of this procedure in a tank there will be fuel vapors.

Do not repair a tank in the conditions of high temperatures or in the presence of a flame as at the same time there is a danger of explosion and getting injured.
The following procedure is used for cleaning of the fuel tank.
After removal of the fuel tank take out from a tank all hoses, tubes and the fuel pump assembled.
Merge the fuel remains from a tank.
Transfer a tank to the place of a sink.
Fill a tank with warm or tap water, vigorously shake up and merge water. Repeat a sink before full cleaning of a tank. Replace a tank if its internal part underwent corrosion.
Completely merge the water which remained after a sink.

ATTENTION
Never leave in the fuel tank water after a sink, otherwise, the fuel tank will rust from within.

"previous page
2.5.12. Removal and installation of the fuel tank
following page"
2.5.14. Removal and installation of the inlet valve of the fuel tank