Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.5.1. Precautionary measures at service of fuel system
2.5.2. Description of fuel system
2.5.3. Description of a fuel supply system
2.5.4. Description of the fuel pump
2.5.5. Procedure of dumping of pressure of fuel
2.5.6. Procedure of check of leak of fuel
2.5.7. Removal and installation of a fuel pipe
2.5.8. Removal and installation of a fuel nozzle
2.5.9. Check of a fuel nozzle
2.5.10. Removal and installation of the regulator of pressure of fuel
2.5.11. Check of a cover of a jellied mouth of the fuel tank
2.5.12. Removal and installation of the fuel tank
2.5.13. Procedure of cleaning of the fuel tank
2.5.14. Removal and installation of the inlet valve of the fuel tank
2.5.15. Check of the inlet valve of the fuel tank
2.5.16. Check of the fuel pump on the car
2.5.17. Removal and installation of the fuel pump assembled
2.5.18. Dismantling and assembly of the fuel pump
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 








Отзывы пользователей:
Internet site: https://porntime.ru - смотреть новое порно анал жмж зрелые бабы !




2-5-16-proverka-toplivnogo-nasosa-na-avtomobile.html

2.5.16. Check of the fuel pump on the car

Fig. 2.251. Removal of a cover of a jellied mouth


Uncover a jellied mouth and include ignition of 2 (fig. 2.251). Then from a jellied mouth 1 the sound of operation of the fuel pump which will stop approximately through 2 pages will be heard. Make sure that established into place a cover of a jellied mouth upon termination of check. If the result of check is not satisfactory, check an electric chain of the fuel pump.
Switch off ignition and wait not less than 10 min.

Fig. 2.252. Check of pressure in a fuel supply hose


Pressure of fuel has to be felt in a fuel 1 supply hose during about 2 sposl of switching off of ignition (fig. 2.252).

"previous page
2.5.15. Check of the inlet valve of the fuel tank
following page"
2.5.17. Removal and installation of the fuel pump assembled