Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.5.1. Precautionary measures at service of fuel system
2.5.2. Description of fuel system
2.5.3. Description of a fuel supply system
2.5.4. Description of the fuel pump
2.5.5. Procedure of dumping of pressure of fuel
2.5.6. Procedure of check of leak of fuel
2.5.7. Removal and installation of a fuel pipe
2.5.8. Removal and installation of a fuel nozzle
2.5.9. Check of a fuel nozzle
2.5.10. Removal and installation of the regulator of pressure of fuel
2.5.11. Check of a cover of a jellied mouth of the fuel tank
2.5.12. Removal and installation of the fuel tank
2.5.13. Procedure of cleaning of the fuel tank
2.5.14. Removal and installation of the inlet valve of the fuel tank
2.5.15. Check of the inlet valve of the fuel tank
2.5.16. Check of the fuel pump on the car
2.5.17. Removal and installation of the fuel pump assembled
2.5.18. Dismantling and assembly of the fuel pump
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 










2-5-6-procedura-proverki-utechki-topliva.html

2.5.6. Procedure of check of leak of fuel

After performance of any works on service of fuel system, be convinced of lack of leak of fuel as follows.
Include on 3 about ignition (for turning on of the fuel pump), and then switch off it.
Repeat inclusion/switching off of ignition 3 or 4 times for rise in pressure of fuel in fuel-supply lines (so far pressure of fuel will not be felt as a hand on a fuel return hose).
Under these conditions be convinced of lack of leak of fuel in any part of fuel system.

Check of fuel-supply lines on the car

Fig. 2.228. Fuel-supply line




ATTENTION
Because the giving fuel-supply line is under high pressure, observe extra care when working on maintenance.
Visually check fuel-supply lines for existence of leak of fuel, cracks and damages of hoses. Make sure that all collars are reliably fixed. Replace details if necessary.


"previous page
2.5.5. Procedure of dumping of pressure of fuel
following page"
2.5.7. Removal and installation of a fuel pipe