Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.5.1. Precautionary measures at service of fuel system
2.5.2. Description of fuel system
2.5.3. Description of a fuel supply system
2.5.4. Description of the fuel pump
2.5.5. Procedure of dumping of pressure of fuel
2.5.6. Procedure of check of leak of fuel
2.5.7. Removal and installation of a fuel pipe
2.5.8. Removal and installation of a fuel nozzle
2.5.9. Check of a fuel nozzle
2.5.10. Removal and installation of the regulator of pressure of fuel
2.5.11. Check of a cover of a jellied mouth of the fuel tank
2.5.12. Removal and installation of the fuel tank
2.5.13. Procedure of cleaning of the fuel tank
2.5.14. Removal and installation of the inlet valve of the fuel tank
2.5.15. Check of the inlet valve of the fuel tank
2.5.16. Check of the fuel pump on the car
2.5.17. Removal and installation of the fuel pump assembled
2.5.18. Dismantling and assembly of the fuel pump
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 










2-5-11-proverka-kryshki-zalivnojj-gorloviny-toplivnogo-baka.html

2.5.11. Check of a cover of a jellied mouth of the fuel tank

Fig. 2.239. Cover of a jellied mouth of the fuel tank


Uncover 1 and check on a print on laying uniformity of a prileganiye of a cover to a jellied mouth, and also absence of damage of laying. If laying 2 is in bad condition, replace a cover (fig. 2.239).

NOTE
If the cover demands replacement, then it is necessary to use the same cover. Application of an inappropriate cover can result in malfunction of system.

"previous page
2.5.10. Removal and installation of the regulator of pressure of fuel
following page"
2.5.12. Removal and installation of the fuel tank