Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. Diagnostics of malfunctions of steering
5.2. Steering repair
5.2.1. Removal and installation of a steering wheel
5.2.2. Removal and installation of a contact spiral and the combined switch
5.2.3. Centering of a contact spiral
5.2.4. Removal and installation of a steering column
5.2.5. Removal and installation of the switch of ignition with the anti-theft device
5.2.6. Removal and installation of the lower shaft of steering
5.2.7. Steering with the amplifier
5.2.8. Check of a free wheeling of a steering wheel
5.2.9. Check of effort on a steering wheel
5.2.10. Check of work of system of stabilization of idling
5.2.11. Check of pressure in a hydraulic system of the amplifier of steering
5.2.12. Check of level of liquid
5.2.13. Procedure of removal of air
5.2.14. Check of a driving belt of the pump of the hydraulic booster of steering on the car
5.2.15. Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering
5.2.16. Removal and installation of a driving belt of the pump of the hydraulic booster of steering
5.2.17. Removal and installation of a steering rod end of draft
5.2.18. Steering mechanism
5.2.19. Removal and installation of the steering mechanism
5.2.20. Removal and installation of a cover of a draft / lath
5.2.21. Removal and installation of the pump of the hydraulic booster of steering
5.2.22. Dismantling and assembly of the pump of the hydraulic booster of steering
5.2.23. Check of the pump of the hydraulic booster of steering
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 










5-2-10-proverka-raboty-sistemy-stabilizacii-kholostogo-khoda.html

5.2.10. Check of work of system of stabilization of idling

Warm up the engine up to the normal working temperature.
Switch off the air conditioning system (if is available).
Completely turn a steering wheel, then check idling rotation frequency. Frequency of rotation of idling has to decrease for a while, and then return immediately to former value. If pressure sensor socket in a steering hydraulic system with the amplifier is connected, check the same, but with the disconnected socket. Instant decrease in frequency of rotation of idling has to be less at the connected sensor.

"previous page
5.2.9. Check of effort on a steering wheel
following page"
5.2.11. Check of pressure in a hydraulic system of the amplifier of steering