Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. Diagnostics of malfunctions of steering
5.2. Steering repair
5.2.1. Removal and installation of a steering wheel
5.2.2. Removal and installation of a contact spiral and the combined switch
5.2.3. Centering of a contact spiral
5.2.4. Removal and installation of a steering column
5.2.5. Removal and installation of the switch of ignition with the anti-theft device
5.2.6. Removal and installation of the lower shaft of steering
5.2.7. Steering with the amplifier
5.2.8. Check of a free wheeling of a steering wheel
5.2.9. Check of effort on a steering wheel
5.2.10. Check of work of system of stabilization of idling
5.2.11. Check of pressure in a hydraulic system of the amplifier of steering
5.2.12. Check of level of liquid
5.2.13. Procedure of removal of air
5.2.14. Check of a driving belt of the pump of the hydraulic booster of steering on the car
5.2.15. Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering
5.2.16. Removal and installation of a driving belt of the pump of the hydraulic booster of steering
5.2.17. Removal and installation of a steering rod end of draft
5.2.18. Steering mechanism
5.2.19. Removal and installation of the steering mechanism
5.2.20. Removal and installation of a cover of a draft / lath
5.2.21. Removal and installation of the pump of the hydraulic booster of steering
5.2.22. Dismantling and assembly of the pump of the hydraulic booster of steering
5.2.23. Check of the pump of the hydraulic booster of steering
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






5-2-16-snyatie-i-ustanovka-privodnogo-remnya-nasosa-gidrousilitelya-rulevogo-upravleniya.html

5.2.16. Removal and installation of a driving belt of the pump of the hydraulic booster of steering

Removal
Disconnect a wire from a negative conclusion of the rechargeable battery.

Fig. 5.44. Bolt and nut of a tension pulley


Remove the lower cover of the engine on the right side, then weaken a bolt of a tension pulley 1 and a nut of 2 (fig. 5.44).
Take off a belt of the pump of the hydraulic booster of steering.

Installation

Fig. 5.45. Contour of a driving belt of hinged units


Establish a belt on a pump 1 pulley, a pulley of a bent shaft 2, a pulley of the air conditioning system (if is available) 3 and a tension pulley of 4 (fig. 5.45).
Adjust a belt tension, see. "Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering".

Check of a driving belt of the pump of the hydraulic booster of steering
Examine a belt on existence of cracks and replace if necessary.

Check on the car of a cover of a tip of steering draft

Fig. 5.46. Cover of a tip of steering draft


Check a cover for existence of cracks and damages. If those are available, replace a cover with new (fig. 5.46).

"previous page
5.2.15. Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering
following page"
5.2.17. Removal and installation of a steering rod end of draft