Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. Diagnostics of malfunctions of steering
5.2. Steering repair
5.2.1. Removal and installation of a steering wheel
5.2.2. Removal and installation of a contact spiral and the combined switch
5.2.3. Centering of a contact spiral
5.2.4. Removal and installation of a steering column
5.2.5. Removal and installation of the switch of ignition with the anti-theft device
5.2.6. Removal and installation of the lower shaft of steering
5.2.7. Steering with the amplifier
5.2.8. Check of a free wheeling of a steering wheel
5.2.9. Check of effort on a steering wheel
5.2.10. Check of work of system of stabilization of idling
5.2.11. Check of pressure in a hydraulic system of the amplifier of steering
5.2.12. Check of level of liquid
5.2.13. Procedure of removal of air
5.2.14. Check of a driving belt of the pump of the hydraulic booster of steering on the car
5.2.15. Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering
5.2.16. Removal and installation of a driving belt of the pump of the hydraulic booster of steering
5.2.17. Removal and installation of a steering rod end of draft
5.2.18. Steering mechanism
5.2.19. Removal and installation of the steering mechanism
5.2.20. Removal and installation of a cover of a draft / lath
5.2.21. Removal and installation of the pump of the hydraulic booster of steering
5.2.22. Dismantling and assembly of the pump of the hydraulic booster of steering
5.2.23. Check of the pump of the hydraulic booster of steering
5.3. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






5-2-15-regulirovka-natyazheniya-privodnogo-remnya-nasosa-gidrousilitelya-rulevogo-upravleniya.html

5.2.15. Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering

Remove the lower cover of the engine on the right side, then weaken a bolt of a tension pulley 3.

Fig. 5.43. Adjustment of a tension of a driving belt of the pump of the hydraulic booster of steering: and – will pull; b – it is weakened; 1 – tension pulley; 2 – tension pulley opening; 3 – bolt of a tension pulley; 4 – nut of a tension pulley; 5 – belt of the amplifier of steering; 6 – pulley of the pump of the hydraulic booster of steering; 7 – pulley of a bent shaft


To adjust a belt of the amplifier of steering 5, weaken a nut of a tension pulley 4, and then turn a tension pulley 1 counterclockwise or clockwise by means of the special tool (A) (fig. 5.43).
Adjust a belt tension, then tighten a bolt and a nut tension шкивак the nominal force of an inhaling.
Moment of an inhaling of bolts and nuts of a tension pulley (a): 25 N · m.

"previous page
5.2.14. Check of a driving belt of the pump of the hydraulic booster of steering on the car
following page"
5.2.16. Removal and installation of a driving belt of the pump of the hydraulic booster of steering