Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.2.1. General description of the engine
2.2.2. Removal and installation of the filtering element of the air filter
2.2.3. Adjustment of a cable of the drive of a butterfly valve
2.2.4. Removal and installation of a throttle branch pipe
2.2.5. Dismantling and assembly of a throttle branch pipe
2.2.6. Cleaning of a throttle branch pipe
2.2.7. Removal and installation of a throttle branch pipe and inlet collector
2.2.8. Removal and installation of a cover of a head of the block of cylinders
2.2.9. Removal and installation of the power unit
2.2.10. Removal and installation of a cover of a chain of the drive of the mechanism of gas distribution
2.2.11. Cleaning and check of a cover of a chain of the drive of the mechanism of gas distribution
2.2.12. Removal and installation of a chain of the drive of the mechanism of gas distribution and natyazhitel of a chain
2.2.13. Check of a chain of the drive of the mechanism of gas distribution and natyazhitel of a chain
2.2.14. Removal and installation of a cam-shaft, pusher of the valve and adjusting laying
2.2.15. Check of a cam-shaft, pusher of the valve and adjusting laying
2.2.16. Dismantling and assembly of a head of the block of cylinders
2.2.17. Check of valves and the directing plugs of valves
2.2.18. Check of a head of the block of cylinders
2.2.19. Check of a valvate spring
2.2.20. Removal and installation of pistons, piston rings and rods
2.2.21. Dismantling and assembly of pistons, piston rings, rods and cylinders
2.2.22. Check of cylinders, pistons and piston rings
2.2.23. Check of piston fingers and rods
2.2.24. Check of conrod necks and conrod bearings
2.2.25. Removal and installation of radical bearings, bent shaft and block of cylinders
2.2.26. Check of a bent shaft
2.2.27. Check of radical bearings
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 



2-2-2-snyatie-i-ustanovka-filtruyushhego-ehlementa-vozdushnogo-filtra.html

2.2.2. Removal and installation of the filtering element of the air filter

Removal
Fig. 2.37. Hose of an exit No. 1 of the air filter and case of the air filter

Disconnect a hose from an exit No. 1 of the air filter 1 from the case of the air filter 2 (fig. 2.37).
Open the case of the air filter having disconnected its collars.
Take out the filtering element of the air filter from the case.

Installation
Installation is made as it should be, the return to removal.
Check and cleaning of the filtering element of the air filter

Check
Check the filtering element of the air filter for pollution existence. Replace excessively dirty filtering element.

Cleaning
Fig. 2.38. Purge of the air filter

Blow the filtering element compressed air from an air outlet from the filter (fig. 2.38).
"previous page
2.2.1. General description of the engine		 following page"
2.2.3. Adjustment of a cable of the drive of a butterfly valve