Suzuki Liana since 2002
1. Operation and maintenance of the car
2. Engine
2.1. Preliminary checks
2.2. Mechanical part of engines
2.2.1. General description of the engine
2.2.2. Removal and installation of the filtering element of the air filter
2.2.3. Adjustment of a cable of the drive of a butterfly valve
2.2.4. Removal and installation of a throttle branch pipe
2.2.5. Dismantling and assembly of a throttle branch pipe
2.2.6. Cleaning of a throttle branch pipe
2.2.7. Removal and installation of a throttle branch pipe and inlet collector
2.2.8. Removal and installation of a cover of a head of the block of cylinders
2.2.9. Removal and installation of the power unit
2.2.10. Removal and installation of a cover of a chain of the drive of the mechanism of gas distribution
2.2.11. Cleaning and check of a cover of a chain of the drive of the mechanism of gas distribution
2.2.12. Removal and installation of a chain of the drive of the mechanism of gas distribution and natyazhitel of a chain
2.2.13. Check of a chain of the drive of the mechanism of gas distribution and natyazhitel of a chain
2.2.14. Removal and installation of a cam-shaft, pusher of the valve and adjusting laying
2.2.15. Check of a cam-shaft, pusher of the valve and adjusting laying
2.2.16. Dismantling and assembly of a head of the block of cylinders
2.2.17. Check of valves and the directing plugs of valves
2.2.18. Check of a head of the block of cylinders
2.2.19. Check of a valvate spring
2.2.20. Removal and installation of pistons, piston rings and rods
2.2.21. Dismantling and assembly of pistons, piston rings, rods and cylinders
2.2.22. Check of cylinders, pistons and piston rings
2.2.23. Check of piston fingers and rods
2.2.24. Check of conrod necks and conrod bearings
2.2.25. Removal and installation of radical bearings, bent shaft and block of cylinders
2.2.26. Check of a bent shaft
2.2.27. Check of radical bearings
2.3. Engine cooling system
2.4. Engine lubrication system
2.5. Fuel system
2.6. System of ignition
2.7. System of release
2.8. The engine and system of decrease in toxicity of the fulfilled gases (M13 and M16 engines)
2.9. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 










2-2-3-regulirovka-trosa-privoda-drosselnojj-zaslonki.html

2.2.3. Adjustment of a cable of the drive of a butterfly valve

Fig. 2.39. Adjustment of a cable of the drive of a butterfly valve


Completely press a pedal of management of supply of fuel and check a gap between the lever 1 and the limiter of the lever of a butterfly valve 2 (a throttle branch pipe), the size of a gap has to be within the range provided below. If the measured value – differs from norm, adjust a gap rotating an adjusting nut of a cable of 3 (fig. 2.39).
Gap between the limiter of the lever and the lever of a butterfly valve (at completely pressed pedal): "a" of 0,5-2,0 mm.

"previous page
2.2.2. Removal and installation of the filtering element of the air filter
following page"
2.2.4. Removal and installation of a throttle branch pipe