Suzuki Liana since 2002
1. Operation and maintenance of the car
1.1. General information
1.2. Keys, locks of doors and the opening body elements
1.3. Governing bodies, combination of devices and equipment of interior of the car
1.4. System of heating and air conditioning
1.5. Seats and means of passive safety
1.6. Launch of the engine, driving and service of the car
1.6.1. Ignition lock
1.6.2. Lever of the parking brake
1.6.3. Pedals (hand-operated KP)
1.6.4. Automatic transmission
1.6.5. Launch of the engine
1.6.6. Use of the transmission (4-speed automatic transmission)
1.6.7. Manual transmission
1.6.8. Braking
1.6.9. Running in
1.6.10. Catalytic converter of the fulfilled gases (the additional equipment)
1.6.11. Fuel economy
1.6.12. Air filter
1.6.13. The correct pressure in tires
1.6.14. The movement at a high speed
1.6.15. The movement on rises and descents
1.6.16. Movement along the slippery road
1.6.17. Traction coupling device
1.6.18. Driving belt
1.6.19. Engine oil and oil filter
1.6.20. Replacement of oil and oil filter
1.6.21. Replacement of an oil filter
1.6.22. Filling of oil and check of lack of leaks
1.6.23. Gearbox oils
1.6.24. Check of level of oil in power units
1.6.25. Replacement of oil in the transmission
1.6.26. Oil for the automatic transmission
1.6.27. Cooling liquid of the engine
1.6.28. Replacement of cooling liquid
1.6.29. Windshield washer liquid
1.6.30. Air filter
1.6.31. Spark plugs
1.6.32. Brakes
1.6.33. Steering
1.6.34. Coupling pedal
1.6.35. Tires
1.6.36. The tool for change of wheels
1.6.37. Change of wheels
1.6.38. Accumulator
1.6.39. Safety locks
1.6.40. Replacement of lamps
1.6.41. Screen wiper brushes
1.6.42. Conditioner
1.6.43. Work with a jack
1.6.44. Launch of the engine from the external accumulator
1.6.45. Towage of the faulty car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






1-6-20-zamena-masla-i-maslofiltra.html

1.6.20. Replacement of oil and oil filter

Fig. 1.184. Removal of a cover of an oil-filling mouth



Merge oil, it still warm so far.
Uncover an oil-filling mouth.
Put the pallet under a drain opening.
By means of a key remove a drain stopper and lower oil.

Fig. 1.185. Drain stopper of the oil pallet



ATTENTION
Oil can be hot. Wait until it cools down so that it can be taken fingers.

Moment of an inhaling of a drain stopper: 50 N · m.
To minimize contact with oil, put on – when replacing oil a shirt with long sleeves and waterproof rubber gloves (similar used when washing ware). If oil got on skin, wash away it water with soap. The oiled clothes need to be washed. Hand over the fulfilled oil and oil filters as salvage or destroy properly.
Establish into place a stopper and about a laying. Wrap a stopper a key till the specified moment.

"previous page
1.6.19. Engine oil and oil filter
following page"
1.6.21. Replacement of an oil filter