1.6.21. Replacement of an oil filter
|Fig. 1.186. Replacement of an oil filter (types A and B)
Using a special key, turn an oil filter counterclockwise and remove it.
Wipe pure rags a zone of installation of an oil filter on the engine.
Slightly oil laying of a new oil filter.
Wrap a new oil filter a hand before contact of laying with an assembly surface.
Inhaling (view from the top end face)
|Fig. 1.187. Scheme of an inhaling of an oil filter
Tighten an oil filter 2 on 3/4 turns.
For reliable fastening of an oil filter it is important to define precisely its situation at the time of a contact of an assembly surface.
Tighten the filter on the specified speed from a point of a contact of an assembly surface (or till the specified moment), using a special key for an oil filter.
Inhaling of an oil filter: on 3/4 turns or 14 N · m.
For prevention of leak be convinced that the filter is installed densely, but without banner.