Suzuki Liana since 2002
1. Operation and maintenance of the car
1.1. General information
1.2. Keys, locks of doors and the opening body elements
1.3. Governing bodies, combination of devices and equipment of interior of the car
1.4. System of heating and air conditioning
1.5. Seats and means of passive safety
1.6. Launch of the engine, driving and service of the car
1.6.1. Ignition lock
1.6.2. Lever of the parking brake
1.6.3. Pedals (hand-operated KP)
1.6.4. Automatic transmission
1.6.5. Launch of the engine
1.6.6. Use of the transmission (4-speed automatic transmission)
1.6.7. Manual transmission
1.6.8. Braking
1.6.9. Running in
1.6.10. Catalytic converter of the fulfilled gases (the additional equipment)
1.6.11. Fuel economy
1.6.12. Air filter
1.6.13. The correct pressure in tires
1.6.14. The movement at a high speed
1.6.15. The movement on rises and descents
1.6.16. Movement along the slippery road
1.6.17. Traction coupling device
1.6.18. Driving belt
1.6.19. Engine oil and oil filter
1.6.20. Replacement of oil and oil filter
1.6.21. Replacement of an oil filter
1.6.22. Filling of oil and check of lack of leaks
1.6.23. Gearbox oils
1.6.24. Check of level of oil in power units
1.6.25. Replacement of oil in the transmission
1.6.26. Oil for the automatic transmission
1.6.27. Cooling liquid of the engine
1.6.28. Replacement of cooling liquid
1.6.29. Windshield washer liquid
1.6.30. Air filter
1.6.31. Spark plugs
1.6.32. Brakes
1.6.33. Steering
1.6.34. Coupling pedal
1.6.35. Tires
1.6.36. The tool for change of wheels
1.6.37. Change of wheels
1.6.38. Accumulator
1.6.39. Safety locks
1.6.40. Replacement of lamps
1.6.41. Screen wiper brushes
1.6.42. Conditioner
1.6.43. Work with a jack
1.6.44. Launch of the engine from the external accumulator
1.6.45. Towage of the faulty car
1.7. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 






1-6-37-smena-koles.html

1.6.37. Change of wheels

Fig. 1.218. Scheme of weakening of wheel nuts



Take a jack, tools and the spare wheel from the car.
Weaken, but do not delete a wheel nut.
Raise the car a jack.
Turn off nuts and remove a wheel.
Establish a new wheel and nuts (a cone to a wheel). Densely put the clamps a hand that the wheel the village is reliable on a nave.
Moment of an inhaling of nuts of wheels: 85 N · m
Lower a jack and tighten nuts a balloon key (till the above-stated moment) cross, as shown in the drawing.

Cap on all disk (the additional equipment)

Fig. 1.219. Removal of a cap


The 1 or 2 tool with the flat end in the car: two tools, a balloon key and the handle of a jack which have one flat end. Using the flat end of the tool, take off a cap, as shown in the figure 1.219.

Fig. 1.220. Tire gate


Cap have so that it did not close and did not damage the gate of the tire (fig. 1.220).

"previous page
1.6.36. The tool for change of wheels
following page"
1.6.38. Accumulator