1.6.39. Safety locks

Fig. 1.222. An example of the fused and normal safety locks

The car is equipped with three types of safety locks.

On it current arrives directly from the accumulator.

Stand between the main safety lock and individual safety locks, forming load groups.

Protect separate electric chains.

The main safety lock, primary safety locks and some individual safety locks are located in an engine compartment. If the main safety lock burns down, then any electric device will not work. If primary safety lock burns down, consumers of its group will not work. For replacement of the main thing, primary or individual safety locks use the original products SUZUKI.

Always use original safety locks of Suzuki. Never use substitutes, it is even temporary. It can damage the equipment and even to cause the fire.

Fig. 1.223. Safety locks in an engine compartment

Fig. 1.224. Safety locks under the dashboard

There are also safety locks under the dashboard from the driver. Having pulled, uncover a box of safety locks. For taking out of fuses use the capture which is available in a box. Current of each safety lock is given in a cover of a box of safety locks.

Fig. 1.225. Capture for safety locks

Fig. 1.226. The whole and burned-down safety locks

The new safety lock has to be the same current as burned down. Do not use substitutes – a foil or a wire. If the new safety lock burned down at once after replacement, in the electrical system serious malfunction is possible.

NOTE You watch that in a box of safety locks there were always spare safety locks.